Collection: High-Quality Flux Core Welding Wire

Flux core welding wire is a tubular MIG wire with flux packed inside the core. As the wire burns, the flux shields the weld pool, so self-shielded wire like E71T-GS runs without a gas cylinder. That makes it the go-to choice for outdoor work, windy job sites, farm and fence repairs, and portable 120V welders. Expect a little more spatter than solid wire and a slag layer to chip off after each pass. E71T-GS is made for single-pass welds on thin to medium mild steel.

We stock gasless E71T-GS flux core wire in .030 and .035 on 2 lb and 10 lb spools, plus flux-cored hardfacing wire (Washington Alloy 450HT and Cronatron austenitic manganese) for rebuilding worn buckets, blades and wear parts. Welding indoors with shielding gas? Shop our ER70S-6 solid MIG wire.

Choose Your Flux Core Wire

  • Gasless flux core wire (E71T-GS) for mild steel. No gas bottle, works outside in the wind, and it is sized for welds on thin to medium steel in one pass.
  • Hardfacing wire for building up worn buckets, blades, hammers and other high-wear parts. We stock Washington Alloy 450HT and Cronatron hardfacing wire.

Flux Core Wire Spool Sizes

  • 2 lb spools: E71T-GS in .030 and .035 for small 120V welders and light repair work.
  • 10 lb spools: E71T-GS in .030 and .035 for everyday shop, farm and fence use.
  • 25 and 33 lb spools: hardfacing wire (Cronatron 1/16" and Washington Alloy 450HT .045) for longer rebuild and maintenance jobs.

Flux Core Welding Wire Comparison

WireBase MetalShielding GasBest ForSizes at ATL
E71T-GS (gasless)Mild steelNoneOutdoor, windy, farm and fence jobs.030, .035 (2 lb and 10 lb spools)
Washington Alloy 450HTSteel (hardfacing)NoneRebuilding worn buckets and blades.045 (33 lb)
Cronatron hardfacingManganese steelNoneHigh-wear parts and crusher surfaces1/16" (25 lb)

Frequently Asked Questions

What is the difference between flux core wire and solid MIG wire?

Flux core wire carries its own flux, so it works without a gas bottle. That is why it is the pick for outdoor and windy work. Solid ER70S-6 wire needs shielding gas but leaves cleaner welds with less spatter and no slag to chip.

Do I need shielding gas for flux core welding?

No, not with gasless E71T-GS wire. The flux makes its own shield, which is why it handles wind so well. Everything in this collection is gasless.

What size flux core wire should I use?

Use .030 for thin sheet metal and smaller 120V machines, and .035 for most farm, fence and general repair work. Match the wire size to your machine and follow the settings in your welder's manual.

Shop Flux Core Welding Wire

Stock up on gasless E71T-GS flux core wire in .030 and .035, plus hardfacing wire for rebuilding wear parts. Browse below, or call 800.551.1086 or email sales@atlweldingsupply.com for pallet quantities or specialty wire.